 |
| Plywood peeling back |
I used a small brush and mixing stick to get epoxy underneath and then used a higher density of weight to hold it down.
 |
| Fixing a few locations of glued plywood on the surface. |
Saturday, August 16, 2014
Plywood Touch Up
The last gluing left some small voids where we didn't get enough weight on top of the plywood and it warped. Here you can see the problem.
I used a small brush and mixing stick to get epoxy underneath and then used a higher density of weight to hold it down.
I used a small brush and mixing stick to get epoxy underneath and then used a higher density of weight to hold it down.
